There are many types of automotive and marine electrical connectors. Some of the common electrical connectors are butt connectors, ring terminals, spade terminals, and quick disconnect connectors. Butt connectors are used to splice two wires together.
Ring terminals are used to connect the wire to a stud point like a screw for grounding or similar. Spade terminals can be used like ring terminals but the nice thing about the spade terminal or fork terminals is that the stud does open to connect to it. The spade can slide around the stud for a connection. Click here for more information on electrical connectors.
Fast disconnect connectors are used to hook up with a tab and are available four tab sizes,.110 tab is 1/8 inch,.187 tab is 3/16 inch,.250 tab is 1/4 inch and.375 tab is 3/eight inch. There are female and male fast disconnect connectors the feminine will slide onto the male tab. Different electrical connectors embody copper lug ring terminals, crimp caps, t faucet connectors, plier faucet connectors, hook terminals, and pin terminals.
Electrical connectors will be insulated or non insulated and are available in numerous kinds of insulation. The non insulated electrical connector is often bare copper that has a tin plating. Insulated terminals can come in PVC insulated, nylon insulated and heat shrink insulated. The PVC insulated sort are normally the cheapest and most common. PVC tends to be a tougher insulation and might crack when crimped and for this reason I do not suggest using them. Nylon insulation is a softer insulation and won’t crack when the terminal is crimped. The nylon insulation can even stand up to greater temperatures. I recommend using nylon insulated terminals and connectors. Heat shrink insulated terminals and connectors are great for functions where the terminal is uncovered to exterior components comparable to high temperatures, rain, snow, and underwater applications.
The heat shrink insulated terminals with adhesive lining create waterproof connections to the wire. Though warmth shrink terminals may be pricey they are the best connectors to use for the reason that will last the longest and virtually never corrode.
When purchasing electrical connectors it is best to use UL listed terminals and connectors to be sure you are getting quality connections. I recommend staying away from terminals and connectors which can be made in China as a result of low quality requirements and low cost supplies they use to make the connectors. In the event you search the internet yow will discover high quality terminals and connectors at reasonable prices.
